Combustion Optimization
Non-ionic surfactants lower surface tension; polyol micro-explosions promote flame propagation for more uniform combustion and higher energy conversion.
New-Generation Green Fuel Additive
Boost efficiency. Cut emissions. Protect engines.
GFX & GFX Marine are multi-functional, organic fuel optimizers for vehicles and vessels. Improve fuel economy by 5–10% while reducing CO, NOx and particulates—safely and reliably.
Organic & Non-hazardous
ISO / SGS / Intertek tested
AUD 10M liability cover
Marine & Land engines
10%
Fuel savings (typ.)
35%
Carbon reduction (max)
26%
CO & NOx reduction*
M
AUD liability cover
*Measured in real-world marine testing; exhaust temperature decreased by ~2–3 °C, indicating more complete combustion.
Beyond additives — fuel & system optimization
Derived from native Australian hardwood extracts, GFX improves atomization, disperses sludge/asphaltenes, inhibits microbial growth, enhances lubricity, and stabilizes cold-flow performance.
System Cleaning & Protection
Disperses gums and wax into nano-scale particles, suppresses biofilms (“fuel bugs”), reduces injector fouling and carbon build-up, and protects valves/pumps.
Cold-Flow & Lubricity
Disrupts wax crystal formation and reduces viscosity for reliable starts in cold regions while plant-based lubricants reduce component wear.
Proven in lab & sea trials
- Intertek (MGO): Higher energy density, improved lubricity & low-temp flow; carbon reduction up to 35%.
- On-vessel testing: CO and NOx reduced by ~26%; exhaust temperature −2–3 °C.
- Engine efficiency: Fuel consumption decreased by ~1.3–1.5% with improved hydrogen/oxygen content balance.
Results vary with fuel quality and engine conditions; many vessels observe even better savings in practice.
Simple dosing — rapid adoption
Initial treatment
Add 1 L per 2,000 L of fuel (1:2000). Use immediately after refueling.
Maintenance
Add 1 L per 4,000 L of fuel (1:4000) monthly.
Initial treatment
Inject 1 L per 5,000 L via dip port (1:5000). Allow ~48 h for natural mixing.
Maintenance
Inject 1 L per 10,000 L (1:10000) after a month or each full voyage.
Always follow onboard HSSE procedures and OEM guidance.
Illustrative savings
Bulk Carrier (LSFO)
Measured fuel savings ~8–10%; CO/NOx down ~26%. Positive CII/EEXI impact and carbon credit upside.
Cost–Benefit Snapshot
At 30 MT/day consumption, a 5% reduction yields material daily savings; additive cost is offset by fuel + carbon credits.
Logistics Truck
With a 1:4000 maintenance dose and 5% savings, a fleet can realize strong annual payback even before spares/maintenance deferrals.
Safe. Certified. Insured.
ISO / SGS / Intertek
MSDS available
AUD 10M liability cover
5+ years shelf stability
Land & Marine engine-safe
Ready to trial GFX on your route?
Ask for a pilot dosing plan and the full test dossier.